Posted On: October 17, 2020
Posted On: October 14, 2020
Posted On: October 07, 2020
Posted On: September 30, 2020
Posted On: September 23, 2020


Via Email:    
Oct 14, 2020

How To Install Nonslip Tape Where You Need It

Nonslip tape is usually installed over slippery areas such as on hatches, where it provides grip without blocking too much light. You can also install it on the edge of stairs, any sloping surface, and other areas where the danger of slipping is present.

  1. Make sure the area to be covered is clean. Use a proprietary cleaner recommended by the manufacturer to clean the clear part of any hatches. Don't use acetone, which might discolor hatch glazing.
  2. Decide where you want to put the tape. Use a grease pencil to mark off areas. Cut tape to length and use a coin to make quarter-circles at each corner. Trim corners around the quarter-circle to prevent them from lifting later.
  3. Peel the backing off the tape and press it onto the area to be covered. Press the tape down firmly (stand on it!) to make sure it adheres properly. That's it, you're finished!